Mailboxes, forwarding, automatic replies, filters, catch-all and domain-wide forwarding, mailing lists, spam filters, mail routing, the delivery log and deliverability, mail programs and webmail.
Every domain of your hosting account can have its own email addresses. You can create mailboxes that store mail, forward mail on to other addresses, answer it automatically, sort it with filters, and read it in a mail program or in webmail.
In the modern look these tools are under Email in the menu (tabs Mailboxes, Mailing lists, Mail delivery log and Spam filters). In the classic look they are in the Email group on the Tools page. The Overview tab shows how many mailboxes, forwarding addresses and automatic replies you have and how much storage the mailboxes use.
Mailboxes#
A mailbox is an email address that stores mail, which you read in a mail program or in webmail. Open Mailboxes.
To create a mailbox:
- Under Address, enter the part before the @, such as
info(lowercase letters, digits, dots, "-" and "_"). - Choose the Domain.
- Enter a Password of at least 10 characters.
- Optionally set a Size limit (MB): how much mail the mailbox may hold. Empty or 0 means no limit.
- Choose Create mailbox.
The Mailboxes list shows each address with links to Open webmail and Set Up on a Device. For each mailbox you can change the Size limit (MB) (Set), set a New password (Change), or Delete it.
Good to know:
- Deleting a mailbox also deletes the mail stored in it. This cannot be undone.
- A full mailbox turns new mail away until space is freed.
- Mail recognised as spam goes to the mailbox's Junk folder. See "Spam Filters" below.
- Your hosting package may limit the number of mailboxes. Mail counts towards your account's disk space; when the account is at its disk limit, new mailboxes are refused.
Mailbox Disk Usage#
To see how much mail each mailbox holds, open Mailboxes. The Used column of the Mailboxes list shows the space each mailbox uses. When a mailbox has a size limit, it shows "used of limit" with a bar; the bar turns red at 90% full.
To give a mailbox more room, enter a new number in its Size limit (MB) box and choose Set. Empty means no limit of its own.
To free space:
- delete old messages, especially large attachments and the Trash and Junk folders, in your mail program or webmail;
- or, if you use POP3, let the program remove mail from the server after downloading it.
Good to know:
- A full mailbox refuses new mail: senders get a message saying it could not be delivered.
- All mail is stored in the
mailfolder of your home folder and counts towards your account's disk space. The total is shown on the Email Overview tab as Storage Used and in Disk Usage.
Mail Forwarding#
Mail Forwarding sends mail for an address on to one or more other addresses. Open Mail Forwarding (the Mail Forwarding box on the Mailboxes page).
To forward an address:
- Under Mail sent to, enter the part before the @, such as
sales, and choose the Domain. - Under Goes on to, enter one or more addresses separated by commas, such as
someone@example.com, other@example.net. - Choose Save forwarding.
The address does not need a mailbox. If a mailbox with the same address exists and you want to keep a copy in it, include its own address in Goes on to.
The list shows each forwarding address and where it goes; Delete stops forwarding.
Good to know:
- Your hosting package may limit the number of forwarding addresses.
- Forwarding spam to a big mail provider (such as Gmail) can make that provider distrust mail from this server. Keep the spam filter on for domains you forward.
- To forward all mail of a domain, use "Domain-wide Forwarding" or the "Catch-all Address" below.
Automatic Replies#
An automatic reply answers mail to an address by itself, for example while you are away. Open Automatic Replies (the Automatic replies box on the Mailboxes page).
To set up an automatic reply:
- Under Address, enter the part before the @ and choose the Domain. It can be a mailbox or a forwarding address.
- Enter a Subject (for example "Automatic reply").
- Write the Message, up to 8192 characters.
- Choose Save automatic reply.
The list shows each address with its subject and message. To stop the reply, choose Delete. To change it, save a new reply for the same address.
Good to know:
- Each sender is answered at most once a day.
- Mailing lists and spam are not answered.
- The original message is still delivered or forwarded as usual.
Mail Filters#
Mail filters are rules that sort a mailbox's incoming mail into a folder, send it on, or throw it away. Open Mail Filters (the Mail filters box on the Mailboxes page). You need at least one mailbox first.
To add a rule:
- Under Mailbox, pick a mailbox, or Every mailbox of the domain. Choose the Domain.
- Under When the, pick what to look at: subject, sender (From), recipient (To), copy recipient (Cc), Reply-To or message text.
- Pick the Comparison (contains, does not contain, is exactly, is not, begins with, ends with) and enter the Text.
- Optionally open More conditions to add a second and third condition, and choose whether all must fit (and) or one is enough (or).
- Under Then, choose move it to the folder, send it on to or throw it away, and enter the folder name or address under Folder or address.
- Choose Add rule.
Good to know:
- The first rule that fits is used.
- A rule for every mailbox of a domain comes before a mailbox's own rules, and new mailboxes of the domain get it too.
- Throwing mail away cannot be undone. Test a rule with "move it to the folder" first.
Catch-all Address#
A catch-all address receives mail sent to addresses of your domain that do not exist. Open Catch-all Address (the Mail for addresses that do not exist box on the Mailboxes page).
Normally such mail is turned away, and the sender is told the address does not exist. To catch it instead:
- Find the domain in the list.
- In Deliver to, enter the address that should get the mail (it can be a mailbox here or an address elsewhere).
- Choose Save.
To go back to turning such mail away, empty the box and choose Save.
Good to know:
- A catch-all address receives a lot of spam, because spammers send to made-up names. Use it only when you need it.
- Existing mailboxes and forwarding addresses are not affected.
- If the domain also has domain-wide forwarding, that comes first.
Domain-wide Forwarding#
Domain-wide forwarding sends a domain's mail for addresses that do not exist to the same name at another domain: mail to anyone@this-domain goes to anyone@other-domain. This is useful when you move to a new domain name. Open Domain-wide Forwarding (the Domain-wide forwarding box on the Mailboxes page).
- Find the domain in the list.
- Under Forward to the domain, enter the other domain, such as
new-example.com. - Choose Save.
To stop it, empty the box and choose Save.
Good to know:
- Mailboxes and forwarding addresses of the domain keep working as before; only mail to addresses that do not exist is sent on.
- Domain-wide forwarding comes before the catch-all address.
- The other domain must accept mail for those names, or the mail bounces there.
Mailing Lists#
A mailing list is one address that passes every message on to all its members: a team, a club, or a newsletter's readers. Open Mailing Lists (the Mailing lists tab under Email).
To create a list:
- Under Address of the list, enter a name such as
teamand choose the domain. - Enter the Owner: bounced messages go to this address.
- Under Members, enter one address per line.
- Tick Anybody may write to the list, not only its members if outsiders may post. Otherwise mail from non-members is refused.
- Choose Create.
Manage opens a list to change its owner, members and who may write (Save), or Delete this mailing list.
Good to know:
- An account can have up to 25 mailing lists, each with up to 1000 members.
- Replies go to the person who wrote, as with ordinary mail.
- Members are added and removed here only; the list does not take subscriptions by email.
Spam Filters#
The spam filter gives every message that arrives from outside a score: the higher, the more it looks like spam. Open Spam Filters (the Spam filters tab under Email). If you have several domains, pick one and choose Open. Each domain has its own settings.
- Judge incoming mail for spam: switches the filter on or off for the domain.
- Put into the Junk folder from a score of: usually 5. Lower catches more spam, and more wanted mail by mistake.
- Refuse from a score of: usually 15. Mail this certain to be spam is not taken at all; the sender is told.
- Senders that are never spam: one address or domain per line.
- Senders that are always refused: one address or domain per line.
Choose Save.
Good to know:
- The settings count for every mailbox and forwarding address of the domain.
- Mail you send yourself after signing in is never judged.
- If wanted mail lands in Junk, add the sender to the never-spam list rather than raising the scores.
Mail Routing#
Mail Routing says which server receives the mail of each domain. Open Mail Routing (the Mail routing box on the Mail delivery log page).
Each domain shows This server or Another server:
- Leave to another server: choose this when the domain's mailboxes are with another provider, such as Google Workspace or Microsoft 365. Mail sent from this server (for example from your website's contact form) to that domain then goes out to that provider, instead of into a mailbox here.
- Receive on this server: choose this when the mailboxes are here.
Good to know:
- This setting does not change your DNS. The MX records tell the rest of the world where to deliver your mail; change them in DNS Records to match. See Domains and DNS.
- If a domain uses another provider but is still set to This server, mail from your own websites to that domain lands in mailboxes here that nobody reads.
Mail Delivery Log#
The Mail Delivery Log shows what happened to messages sent from and to the addresses of your domains. Open Mail Delivery Log (the Mail delivery log tab under Email).
- Enter a sender or recipient address (or part of one) in the search box, or leave it empty.
- Choose what to show: Everything, Accepted, Delivered, Delayed or Failed.
- Choose Search.
Each line shows the time, what happened, From, To and a Detail with the reason, such as the answer of the receiving server. Use Newer and Older to page through the results.
Typical uses:
- A message did not arrive: search for the recipient and look for Failed or Delayed and the reason.
- A sender says their mail bounced: search for their address.
Good to know:
- You see only messages of your own domains.
- Delayed mail is tried again automatically for some time before it fails.
Mail Deliverability#
Receiving mail servers trust your mail more when three DNS records are in place: SPF (which servers may send for the domain), DKIM (a signature on each message) and DMARC (what to do with mail that fails both). Open Mail Deliverability (the Mail Deliverability box on the Mail delivery log page).
The table shows, for each domain, whether SPF, DKIM and DMARC are Set or Missing in your DNS zones on this server. A domain whose DNS is not kept on this server says so.
- Check against live DNS looks up what receiving mail servers see right now, including where mail goes (MX) and the reverse DNS of the server's sending address. Check again repeats it.
- Repair: add the missing records adds SPF, DKIM and DMARC to your DNS zones here where they are missing. Records you already have are left alone.
Good to know:
- A problem in the live check for a record that is in your zone means the domain does not use this server's nameservers, or the change has not spread yet.
- The Mailboxes page also lists the DNS records for mail of each domain, to copy to another DNS provider.
- Reverse DNS of the server's address is set by your hosting provider; ask your hosting provider if it does not lead back.
Setting up mail programs and devices#
You can read your mail in any mail program: Outlook, Thunderbird, Apple Mail, the Gmail app, K-9 Mail and others. Open Mailboxes and choose Set Up on a Device next to the address. The page shows the settings:
- Username: the full email address. Password: the mailbox's password.
- Incoming server (IMAP, recommended):
mail.followed by your domain, port 993, SSL/TLS. IMAP keeps mail on the server, so every device shows the same folders. - Incoming server (POP3): port 995 with SSL/TLS, or 110 with STARTTLS. POP3 moves the mail to one device.
- IMAP with STARTTLS: port 143.
- Outgoing server (SMTP): port 465 with SSL/TLS, or 587 with STARTTLS (and port 26 if the page shows it, for internet providers that block the others). The outgoing server needs the same username and password.
iPhone, iPad and Mac: open the page on the device and choose Download the configuration profile; the device asks for the password and adds the account. The profile holds no password.
Good to know:
- Logins without encryption are refused.
mail.and the domain's MX record must point at this server (the DNS zone made by the panel already does).- Once the domain has a certificate under SSL/TLS that covers its
mailname, mail programs get a valid certificate. Until then the program may ask whether to trust the server's own certificate.
Webmail#
Webmail lets you read and send mail in the browser, with no mail program. To open it:
- choose Open webmail next to a mailbox on the Mailboxes page (the address is filled in for you), or
- go to
/webmailon the server's name or on any of your domains once its DNS points here, for examplehttps://example.com/webmail.
Sign in with the full email address and the mailbox's password.
Good to know:
- Webmail shows the same folders as IMAP, so mail read or moved there is read or moved on your other devices too.
- Your hosting provider may show webmail under its own name.
- If you forgot a mailbox's password, set a new one under New password on the Mailboxes page; you cannot see the old one.
Something missing? Ask in the community or open a ticket.