Docs

Resellers

How to create resellers, set their limits, permissions, addresses and nameservers, use reseller plans, move accounts between owners, and what a reseller sees and can do in its own area.

12 min read Updated From the panel's guide

A reseller is a panel login that creates and looks after hosting accounts of its own: as many as you allow, on the packages you allow. A reseller sees and changes only its own accounts. It signs in at the same address as you and lands in the reseller area (/reseller). This page covers the admin menu section Resellers, and then the reseller area from the reseller's point of view.

Reseller Overview and Plans#

In the admin area, open Resellers → Reseller Overview and Plans (Reseller Overview and Plans). The page has three parts: Create a reseller, the list of Resellers, and Reseller plans.

To create a reseller:

  1. Enter a Name: 2 to 32 characters, a lowercase letter first, then lowercase letters, digits, - or _. The name cannot be one that is already in use by an account or another login.
  2. Enter a Password of at least 10 characters.
  3. Either choose a Reseller plan, or fill in the limits yourself:
    • Accounts it may have: the number of accounts.
    • Disk space it may give out in all (MB) and Monthly data transfer it may give out in all (MB): empty means no limit.
    • Packages it may use: tick the packages.
  4. Click Create reseller.

Give the reseller its name and password, and the panel's address. More settings (permissions, own packages, addresses, nameservers) are in the reseller's entry in the list below; see "Reseller Permissions".

Good to know:

  • Create packages first. A reseller's accounts are always on a package, and it can only use the packages you tick, plus its own if you allow them.
  • A reseller with an account limit of 0 cannot create accounts.

Reseller Permissions#

In the admin area, open Resellers → Reseller Permissions (Reseller Permissions). Each reseller is listed with how many accounts it has out of how many it may have, its plan, and whether it is suspended. Click a reseller to open its settings:

  • Reseller plan: apply a plan, or keep the limits typed here.
  • Accounts it may have, Disk space it may give out in all (MB) and Monthly data transfer it may give out in all (MB).
  • May make packages of its own: the reseller can make packages named name_…, within its allowance.
  • Allow overselling: see "How a Reseller's Allowance Is Counted".
  • Addresses it may give its accounts and Main shared address for its accounts: see "Reseller IP Addresses and Nameservers".
  • Its own nameservers: the same.
  • New password: leave it empty to keep the current one.
  • Suspended: the reseller cannot sign in; its accounts keep running.
  • Permissions: Create accounts, Suspend and unsuspend accounts, Change an account's package, Change an account's password, Delete accounts, and Open an account's client area. Untick what the reseller may not do.
  • Packages it may use.

Click Save. A new password or suspending the reseller signs it out at once.

Good to know:

  • If Sign-in Security Policies require two-factor authentication, resellers must set it up too.

Reseller Plans#

A reseller plan is a ready set of limits for resellers. Choose a plan when you create a reseller, or apply it to one later, instead of typing the same limits each time.

In the admin area, open Resellers → Reseller Overview and Plans (Reseller plans) and go to Reseller plans.

To add a plan:

  1. Enter a Name (1 to 40 letters, digits, spaces, dots, dashes or underscores). Saving under an existing name changes that plan.
  2. Enter the Accounts, Disk space in all (MB) and Data transfer per month in all (MB). Empty means no limit.
  3. Tick the Packages the reseller may use.
  4. Optionally write a Note, for your own reference, about what else the plan includes.
  5. Click Add plan.

The table lists the plans with Edit and Delete buttons.

The panel enforces these parts of a plan: the number of accounts, the total disk space and data transfer the reseller's accounts' packages add up to, and which packages it may use.

Good to know:

  • A plan is copied into the reseller when you apply it. Editing the plan later does not change resellers that already have it: apply it to them again in Reseller Permissions.
  • Deleting a plan leaves resellers with the limits they have.

How a Reseller's Allowance Is Counted#

When a reseller creates an account or changes an account's package, the panel checks the reseller's disk space and data transfer allowance. There are two ways to count, chosen with Allow overselling in Reseller Permissions.

Without overselling (the default): what counts is what the packages allow. The disk space and data transfer of the packages of all the reseller's accounts, plus the new one, must fit in the allowance. A package with no limit on disk space or data transfer cannot be used while the reseller's own allowance is limited.

With overselling: the packages may add up to more than the allowance. What counts is what the reseller's accounts really use now. A new account can be created as long as the accounts together use less disk space than the allowance, and have transferred less data this month than the allowance.

In both cases, the number of accounts may not go above Accounts it may have. A reseller's own packages may never allow more disk space or data transfer than its whole allowance.

If the reseller has no disk or transfer allowance set (empty), only the number of accounts and the allowed packages limit it.

Good to know:

  • The reseller sees a message that names the numbers when a check fails, and is told to ask you for more.
  • Reseller Usage and Account Status shows what each reseller's accounts use together.

Reseller IP Addresses and Nameservers#

In Reseller Permissions, open a reseller's settings.

Addresses it may give its accounts: IP addresses of this server, separated by spaces. The reseller can then put one of its accounts on such an address instead of the shared one. If you leave it empty, the reseller's accounts stay on the shared address unless you move them yourself.

Main shared address for its accounts: one of the addresses above. All of this reseller's accounts that have no address of their own are then served on it, and their DNS records point to it, instead of the server's main address. If you leave it empty, the server's main address is used. When you change it, the reseller's accounts are moved to the new address. Accounts that could not be moved are named in the message.

Its own nameservers: two names, such as ns1.reseller-domain.com and ns2.reseller-domain.com. The DNS zones of this reseller's accounts then name these two instead of the server's nameservers. Both names must point to this server: they need A records in the reseller's own domain, and must be registered as nameservers with its registrar. If you leave both empty, the server's nameservers are used.

When an account moves to another owner, its zones and shared address follow its new owner's settings.

Suspending and Deleting a Reseller#

In the admin area, open Reseller Permissions and click the reseller.

To suspend the reseller's login: tick Suspended and click Save. The reseller cannot sign in and is signed out, but its accounts keep running.

To suspend all its accounts: click Suspend All Its Accounts. Each account is suspended with the reason "Suspended with the reseller", and the message says how many were changed. Unsuspend All Its Accounts makes them active again.

To delete the reseller: click Delete this reseller (its accounts become yours). The reseller's login is removed. Its accounts are not deleted: they become your own, and their DNS zones and addresses switch back to the server's own nameservers and shared address.

Good to know:

  • To delete a reseller's accounts as well, delete them first in All Accounts: search with Look In: Owner, tick them and use Delete.
  • Packages the reseller made for itself stay on the server after the reseller is deleted.

Move an Account to Another Owner#

In the admin area, open Resellers → Move an Account to Another Owner or Move Several Accounts to Another Owner (Move Accounts to Another Owner). Both open the same page, which lists every account with its domain and current owner.

  1. Tick one account or several. The box in the table heading ticks all of them.
  2. Under New owner of the ticked accounts, choose a reseller, or you (the administrator).
  3. Click Change owner.

A reseller sees and manages the accounts that belong to it, and they count towards its account limit. The DNS zones of the moved accounts take the new owner's nameservers, and accounts without an address of their own move to the new owner's main shared address.

You can also change the owner of one account on its account page, under Belongs to.

Good to know:

  • Moving an account to a reseller does not check the reseller's limits, so you can give a reseller more accounts than its allowance. It then cannot create new ones until it is back under its limit.
  • The account's package is not changed. If the reseller may not use that package, it cannot choose it again after changing the account to another package.

Message All Resellers#

In the admin area, open Resellers → Message All Resellers (Message All Resellers).

  1. Enter a Subject and the Message.
  2. Click Send to N address(es).

The message is sent as plain text, one message per recipient, to the contact email address stored with each reseller. Resellers without a contact address are skipped. The sender is the contact address under Alert Contacts. After sending, the page tells you how many messages were handed to the mail server.

A reseller sets its own contact address on its password and sign-in page.

To show a notice inside the reseller area instead of sending email, use Announcements for Clients. It has a field for resellers, which they see at the top of their area.

Reset Reseller Permissions#

In the admin area, open Resellers → Reset Reseller Permissions (Reset Reseller Permissions).

  1. Choose the Reseller. The list shows how many accounts it may have and how many packages it may use.
  2. Click Reset.

Resetting takes away the packages the reseller may sell and sets its allowance of accounts to 0. The accounts it already has keep running and stay with it. The reseller can still sign in and look after its existing accounts, but it cannot create new ones.

Afterwards, give the reseller new limits in Reseller Permissions, or apply a reseller plan.

Good to know:

  • The disk and transfer allowance and the permission boxes are not changed by a reset.

Accounts by Reseller#

In the admin area, open Resellers → Accounts by Reseller or Reseller Usage and Account Status (Reseller Usage and Account Status). Both open the same page, with one card per reseller.

Each card shows:

  • how many accounts the reseller has, and whether the reseller is suspended;
  • the disk space its accounts use together, and their data transfer this month;
  • each account with its domain, package, disk use, transfer and state (Active or Suspended).

Next to each account are these buttons:

  • Suspend or Unsuspend: acts at once, then brings you back to this page.
  • Delete: opens the account's page at the delete form.

The link Limits and status of the reseller opens Reseller Overview and Plans.

Accounts that belong to you, not to a reseller, are not shown here. Find them in All Accounts with Look In: Owner and the word root.

The Reseller Area#

This section is written for resellers. When you sign in with a reseller login, you land in the reseller area at /reseller. It shows:

  • News from the administrator, when there is any.
  • Your accounts: how many you have out of how many you may have.
  • Your packages: the packages you may use for new accounts. If none are listed, ask the administrator.
  • Create an account, if the administrator allows you to create accounts.
  • Your own packages, if the administrator allows you to make them.
  • Accounts: your accounts, each with its main domain, package, disk use, data transfer this month and status (Active, Suspended, Over transfer limit or Disk full). Click Manage to open one.

You only see and change your own accounts. Server settings, other accounts and the admin area are not available to you.

Good to know:

  • Your password and two-factor authentication are on the password and sign-in page, reached from the menu.

Creating an Account as a Reseller#

This section is written for resellers. In the reseller area (/reseller), use Create an account:

  1. Enter a Username: 2 to 16 lowercase letters and digits, starting with a letter.
  2. Enter the Main domain, such as example.com.
  3. Enter a Password of at least 10 characters. Your client signs in with it.
  4. Optionally enter the client's Contact email.
  5. Choose a Package. Every account must be on one of your packages.
  6. Click Create account.

The account is created with its first website, DNS zone and client-area login. It uses your nameservers and your shared address, if the administrator set them for you.

The account is not created when:

  • you already have as many accounts as you may have;
  • the package would take your accounts over your disk space or data transfer allowance;
  • the username or domain is already in use on the server.

The message names the reason. Ask the administrator for a higher allowance if needed.

Your Own Packages as a Reseller#

This section is written for resellers, and applies only if the administrator lets you make packages of your own. In the reseller area (/reseller#own-packages), use Your own packages:

  1. Enter a Name: up to 31 lowercase letters, digits or hyphens. The package is saved as yourname_name.
  2. Enter the Disk space (MB) and Monthly data transfer (MB). Both must be at least 1.
  3. Enter the number of Websites, Databases, FTP accounts and Mailboxes. Each must be at least 1.
  4. Click Save package.

Saving under an existing name changes that package for all accounts on it. The list shows your packages with their limits and a Delete button.

Good to know:

  • A package cannot allow more disk space or data transfer than your whole allowance.
  • You can have up to 50 packages of your own.
  • A package that one of your accounts uses cannot be deleted. Move the account to another package first.

Managing an Account as a Reseller#

This section is written for resellers. In the reseller area, click Manage next to an account. Depending on what the administrator allows, the page has these parts:

  • Details: username, main domain, contact email and status.
  • Open this account's client area: your browser is then signed in to the client's area. A bar at the top lets you switch to another of your accounts, or go back with Back to my own area.
  • Suspend or Unsuspend: a suspended account's websites show a suspended page, and its mail logins, FTP logins, scheduled tasks and panel login are switched off. Its data is kept.
  • Package and usage: choose another of your packages and click Change package. Below it, you see what the account uses against each limit.
  • Address: shown when the administrator gave you IP addresses. Choose one of your addresses that no other account uses, or the shared address, and click Apply. The account's DNS records follow.
  • Set a new password: at least 10 characters. The client is signed out everywhere.
  • Delete this account: type the username and click Delete account. This removes its websites, mail and databases, and cannot be undone.

Buttons for things you are not allowed to do are not shown.

Was this article helpful?

Something missing? Ask in the community or open a ticket.