Docs

Server Setup

The tools in the Server Setup section of the admin menu, from the initial DNS settings and root password to the terminal, server preferences and automatic updates.

11 min read Updated From the panel's guide

The Server Setup section of the admin menu holds the basic settings of the server. It covers the address and nameservers for new DNS zones, the root password, the panel's own timetable, disk quotas, the clock, web statistics, a root terminal, the server-wide preferences and automatic upgrades of intoPanel.

Initial Server Setup#

In the admin area, open Server Setup → Initial Server Setup (open). This page sets the address and nameservers that every new DNS zone is made with.

The DNS server card shows whether BIND is running and how many zones the server has. The DNS server answers only for domains hosted on this server. It does not look up other names for anyone.

Under Settings for new zones:

  • Public IP address: the address that websites on this server are reached at. New zones point to it.
  • Nameserver 1 and Nameserver 2: your nameserver names, for example ns1.yourcompany.com and ns2.yourcompany.com. If you leave both empty, each domain uses ns1 and ns2 under its own name (for example ns1.example.com for example.com).
  • Nameserver 3 and Nameserver 4: optional extra nameservers.

To set them up:

  1. Enter the public IP address and at least two nameserver names.
  2. Click Save settings.
  3. At the registrar of your nameservers' domain, register the nameserver names (glue records) with this server's address.

Good to know:

  • The settings apply to zones created from now on. Existing zones keep their records. Clients edit their own records in the client area, and you can edit any zone under DNS Zones.
  • If BIND is not installed, the page says so. Run the intoPanel installer again to install it.

Root Password#

In the admin area, open Server Setup → Root Password (open). This page changes the password of the server's root user, which is used on the console and over SSH. It is not your panel login; change that under your name at the top right, My Admin Password.

  1. Enter the new password in New password and again in The same again.
  2. Click Change the root password.

Rules for the password:

  • 12 to 128 characters, on one line.
  • It must contain lowercase letters, capital letters and digits.

Good to know:

  • The panel sets the password with the system's own tool and cannot show it again. Keep it somewhere safe.
  • Whether root can sign in over SSH with a password depends on the SSH settings. See SSH Password Sign-in in Security.

Panel Scheduled Tasks#

In the admin area, open Server Setup → Panel Scheduled Tasks (open). This page lists the tasks intoPanel runs for itself on a fixed timetable. All times are the server's own time (see Server Time below).

  • Upgrade of the panel: once a day intoPanel looks for a new version and installs it. To choose the time, enter an Hour (0-23) and Minute (0-59) and click Save. If automatic upgrades are off, the button reads Save and switch on, and saving the time switches them on. The usual time is 03:17. To switch automatic upgrades off, use Automatic Update Settings.
  • Backups: shows whether automatic backups are on, how often they run and the hour they start. Change them under Backup Settings.
  • Tasks with a fixed schedule: certificate renewal (twice a day), the check for expired accounts (every 10 minutes), disk and data transfer warnings (hourly), the check for forbidden background programs (every 5 minutes), spam rule updates (daily) and log rotation (see Log Rotation). These times cannot be changed.

Hosting accounts' own scheduled tasks (cron jobs) are managed by the clients in the client area, not on this page.

Disk Quota Setup#

In the admin area, open Server Setup → Disk Quota Setup (open). This tool writes every account's disk limit into the file system again. The limit comes from the account's package, or from a limit set for that account alone.

Use it:

  • after moving the home folders to a new disk,
  • after restoring the server,
  • when accounts can go over their limits, which means the limits are not being enforced.

To run it, click Write the limits again. The work runs in the background. The page shows its progress and output, and updates itself when the task ends.

Good to know:

  • The tool does not change any limit. It only applies the limits the panel already has. To change one account's limit, use Disk Limits per Account. To change a package's limit, edit the package.
  • Accounts already over their limit are listed under Accounts Over Their Disk Limit.

Server Time#

In the admin area, open Server Setup → Server Time (open). The card shows the Time on the server, the Time zone, and whether the Clock is kept right over the network.

To change the time zone:

  1. Choose a zone under Server time zone, such as Europe/London, Asia/Karachi or UTC. The list holds every zone installed on the server.
  2. Click Change.

The panel's scheduled tasks, backups, log times and the malware scan start time all follow the server's time zone. Some lists in the panel, such as notifications and the session log, show UTC; they say so.

To correct a clock that is wrong, open Change Hostname and click Set the Clock from the Network. This switches network time on and restarts the time service (chrony), which sets the clock straight away. It is then right to within a few seconds. If network time cannot be switched on, check that the chrony package is installed.

Web Statistics Programs#

In the admin area, open Server Setup → Web Statistics Programs (open). This page explains how website statistics work in intoPanel. There is nothing to configure here.

intoPanel has its own built-in statistics. It shows each website's visitors, pages, errors and data transfer, read straight from the web server's logs when the page is opened. Because the figures are read live, there is nothing to install, schedule or process, and so there is never a backlog.

  • Web traffic statistics: live, in the client area under Visitors and logs.
  • Data transfer statistics: counted all the time. For all accounts, see Data Transfer Usage.

How far back the figures go depends on how long logs are kept. Set that under Log Rotation. Awstats, Webalizer and Analog are not used and cannot be installed through the panel.

Terminal#

In the admin area, open Server Setup → Terminal (open). This is a shell on the server in your browser, signed in as root.

  • Click into the black area to type.
  • Selecting text with the mouse copies it. Copy copies the selected text, or the whole screen when nothing is selected.
  • Ctrl+V, Shift+Insert or the Paste button pastes.
  • Right-click opens the browser's own menu, with Copy (for the selected text) and Paste.
  • Ctrl+C copies while text is selected, and otherwise interrupts the running program. Other control keys (Ctrl+D, Ctrl+Z, Ctrl+R, Ctrl+L and so on) go to the shell.
  • Shift+PageUp scrolls back.
  • New terminal starts a fresh shell.

The shell ends when you leave the page or type exit.

Good to know:

  • Every command runs with full root rights and cannot be undone. Take extra care with commands that delete or overwrite files.
  • Each time a terminal is opened, the panel logs who opened it and from which address.
  • For long tasks that must survive closing the page, use screen or tmux, or an ordinary SSH connection.

Server Preferences: the intoPanel tab#

In the admin area, open Server Setup → Server Preferences (open). The first tab, intoPanel, holds the server-wide settings. Change what you need and click Save server preferences at the bottom. A setting left at 0 or empty means "none" or "no limit".

  • New accounts: the PHP version of new websites (existing websites keep theirs), the Package offered first when creating an account, and the Days of notice before an account expires (0 to 90). On the expiry date the account is suspended and you are always told.
  • Email: Messages a domain may send per hour, used for accounts whose package sets no limit. Size limit of a new mailbox (MB), used when a mailbox is created without a limit.
  • Usage warnings: warn by email when an account has used a share (50 to 99%) of its disk space or its monthly data transfer. This is checked once an hour. Send these notices again while an account stays over the line sets how often the same notice repeats: every 6 or 12 hours, once a day (the default), once a week, or only once until the account goes below the line. The urgent disk space notice goes out as soon as it is reached, and restarts or updates of the panel do not send notices again.
  • More notices: an urgent notice at a higher disk share (50 to 100; 100 tells you when an account is full), and a notice when the five-minute load average reaches a number. Twice the number of processor cores is a sensible value.
  • Domains: domains that may not be hosted on this server, one per line (at most 500). Nobody can create an account, website, subdomain or alias with one of these names or any name below it. A tick box allows accounts to host names below the server's own hostname.
  • Files and backups: Largest upload in the file manager (1 to 4096 MB; the default is 512), how many days before the trash is emptied, the Compression of backups (1 is fastest, 6 is usual, 9 is smallest), and whether mail sent by PHP scripts is marked with the script that sent it.
  • Data transfer: Keep websites online when an account is over its monthly data transfer. Without this, those websites are switched off until the next month.
  • Password strength and Signing in to the panel: see the next sections.

Server Preferences: password strength#

In the admin area, open Server Setup → Server Preferences (open) and find the Password strength card. The same card opens alone from Security → Password Strength Rules. These rules apply to panel passwords of administrators, resellers and clients when a password is set or changed. Existing passwords keep working.

  • Shortest password: 10 to 64 characters. The default is 10.
  • Least password strength (%): 1 to 100. Empty or 0 asks for no particular strength. Strength counts the length and the kinds of characters used; for example, 12 mixed characters with a symbol reach about 78%.
  • A new password must contain: tick any of An upper-case letter (A-Z), A lower-case letter (a-z), A digit (0-9) and A symbol (such as ! # % - _).

Click Save server preferences to apply. The installer starts you with upper-case, lower-case and digits required and a strength of 50%.

Good to know:

  • The root password has its own fixed rules (see Root Password above).
  • To make passwords expire after a number of days, use Sign-in Security Policies.

Server Preferences: signing in to the panel#

In the admin area, open Server Setup → Server Preferences (open) and find the Signing in to the panel card.

  • Minutes without activity before a session ends: 5 to 1440. The default is 30. A session always ends 12 hours after signing in, whatever this is set to.
  • Address to go to after signing out: an https:// or http:// address, such as your company's website. Leave it empty to go back to the sign-in page.
  • Let clients and resellers reset a forgotten password by email: the sign-in page then shows "Forgotten your password?". A link that works once, for half an hour, is sent to the contact address stored for the account. Administrators cannot reset their own password this way.
  • End a session when it is used from another address than it started on: protects against stolen session cookies. Leave it off if your own address changes often, for example on some mobile connections.

Click Save server preferences to apply. Failed sign-ins and lock-outs are set under Sign-in Attack Protection.

Server Preferences: the other tabs and Find#

In the admin area, open Server Setup → Server Preferences (open). Besides the intoPanel tab, the strip of tabs holds All and one tab for each group of the preferences that hosting administrators know from other panels: Compression, Development, Display, Domains, Logging, Mail, Notifications, Packages, PHP, Redirection, Security, Software, SQL, Stats and Logs, Stats Programs, Status, Support and System. Use the arrows to scroll through the tabs.

These tabs are a reference list, not a form. For each setting they show the Usual default and what intoPanel does about it:

  • Set in intoPanel: the setting exists, and the note says where to change it. Open goes there.
  • Built in: intoPanel always works one way. The note says how.

Settings that only make sense inside another product are left out, and the page tells you how many were left out.

To find a setting by name, type part of it in the Find box at the right of the tabs and press Enter. For example, "quota" lists every setting with "quota" in its name, together with its tab.

Automatic Update Settings#

In the admin area, open Server Setup → Automatic Update Settings (open). This page chooses whether intoPanel upgrades itself.

The page shows whether automatic upgrades are enabled or disabled, and the installed version and build. Click Enable Automatic Upgrades or Disable Automatic Upgrades to switch.

When enabled, the server looks for a new version of intoPanel every night (at 03:17, or at the time chosen under Panel Scheduled Tasks) and installs it. Websites, mail and databases keep running during an upgrade. Only the panel restarts, so it is unavailable for a few seconds.

Related pages:

  • Update intoPanel: check for a new version, see the waiting changes, and install them now.
  • Change Log: what changed in the installed version.
  • Update System Software: updates of the operating system itself, which are separate from panel upgrades.

Turning automatic upgrades on is recommended, so that security fixes arrive without delay.

Was this article helpful?

Something missing? Ask in the community or open a ticket.